01
Wire Trim Edge Cutting Tape
video
Wire Trim Edge Cutting Tape
Wire Trim is used to trim many types of coatings. Trim a wide variety of coatings, from medium durometer polyurethane to high durometer polyurea’s. The main function of Wire Trim Edge Cutting Tape is trimming through strong coatings from the bottom up. The method involves the use of a small high-strength cutting filament, adhered to the edge of adhesive tape and positioned on a surface along the desired trim line where the coating is to be applied.
Structure of Polyurethane wire trim tape
PET+ stainless steel/fiber+ glue+ paper/film liner
Technical Data of Bedliner Wire Cutting Tape
| Applications | trim coatings |
| Tape Adhesive | Double-Sided, High Tack |
| Tape Dimensions | 1/4-Inch X 100 Feet or 1/3-inch x 100 Feet ect |
| Colors | Transparent |
| Material | Polyester,Polyurethane,Metal |
| Liner | Paper/film |
| Recommended Uses | Industrial, Construction, Electrical, Plastic |
Benefits Of Wire Trim Tape
Enables sharp, precise cuts through tough polyurethane and polyurea coatings
Cut from the bottom up, protecting the surface
Fast, residue-free removal when de-masking
The process of installing a spray on bedliner much faster and easier
Application Of Wire Trim Tape
Steel Wire Trim Edge Cutting Tape widely used in the field of car and subway spraying points. Also using Wire Trim for Pickup Truck Bedliners.
Application Process of Stainless Steel cutting wire tape
Here the application process is illustrated as Wire Trim is used to trim a spray-on truck bedliner.
- Remove wax and silicone from a dirt-free surface. Then apply Wire Trim along all trim lines. For best results, notch tape to conform to tight corners and gently stretch the tape around curves.
- Apply PlazMask, our pre-folded masking film, or masking paper, then scuff right up to the wire edge. Wire Trim is durable enough to withstand most prep work. Wire Trim's patented technology makes it easy to work fast. The special adhesive permits repositioning if required.
- Proceed to spray the pick up truck bed just as you would normally, directly over the WireTrim tape and any other masking products you used in preparation for the spray job.
- Pull the wire through the coating to provide a clean finished edge at an angle that suits your style. Choose from standard or heavy-duty wire to best suit your application. Always pull wire out as soon as possible after application.
- Remove PlazMask or masking paper and tape to complete the trimming process. Our Proline products feature a high tack adhesive, remove slowly to eliminate clean up.
Packing of WireTrim Tape
10 rolls/bag, 1 bag/box, 9 box/ carton
Wire Trim Tips & Helpful Hints
Adhesive is left behind after tape is removed
As a rule, Wire Trim should never leave adhesive residue behind once the tape has been removed from the vehicle. Try pulling the tape at a slower pace in order to ensure that all the adhesive remains with the tape and does not stay on the vehicle.